38/52
3
5.
The lifting frame with its support wheels
now extends to contact the next step down.
As soon as the lifting frame touches the
step with its support wheels the Liftkar PT
raises slightly
(depending on the height of
the step)
, moves forward and lowers the
climber gradually and in a controlled
manner and stops in the neutral position in
single-step mode.
6.
Now you can move the Liftkar PT forward to
the next step edge and repeat the same
procedure.
6.4 Operation on spiral staircases
Please observe the following points when operating the stairclimber on spiral
staircases:
•
For moving
UP
start on the
outside
of the staircase.
(The Liftkar PT moves
inwards when climbing UP)
•
For moving
DOWN
start on the
inside
of the staircase.
(The Liftkar PT moves
outwards when climbing DOWN)
If you do start moving too close to the banisters/wall then shift the unit to the side by
reversing
(on a landing or wider step if possible)
and start again at a tighter angle.
IMPORTANT: As always practice without a passenger.
