Sanli Self-Propelled 4-in-1 User Guide
13
Basic maintenance made easy.
WARNING!
If your mower is not serviced correctly, you could reduce
your mower’s ability to operate and void warranty.
1. Spark plug.
Firstly, wait until the engine has cooled
before disconnecting the spark plug cover
and then removing the spark plug with the
box spanner supplied (see fig. 20). If it is
dirty, you can clean the plug with a wire brush.
For best results we advise you to replace
the spark plug after 100 hours of use. The
replacement spark plug is NGK BPR 6ES.
When refitting the spark plug do not over-
tighten. If adjusting yourself, note the spark
plug gap must be set to 0.75mm.
2. Air filter.
Ensure the engine is cool, unscrew the
two top air filter nuts, using the small box
spanner supplied (see fig. 21), lift up the
cover and remove the air filter element.
Put the cover back on the housing
immediately to prevent any objects falling
into the air intake.
Either carefully brush off any excess dirt
particles, or replace the air filter with a new
one (see fig. 22). To protect your warranty,
only use a genuine Sanli air filter. We
recommend that you replace the air filter
after every 12 months of regular usage.
When the air filter has been cleaned or
replaced, screw-in the cover, taking care not
to over-tighten.
Fig. 20
Fig. 21
Fig. 22
