SANLI SLHT600, Руководство пользователя

Страница: 6 / 12

6
Sanli Hedgetrimmer User Guide
Mix 25 parts of 95 octane regular
unleaded petrol to 1 part 2-stroke oil
(25:1). Do not overfill the tank as this can
risk fuel spilling on hot parts when in use.
Press primer bulb three or four times until
a flow of fuel is visible inside the fuel line
see (
Figure 1)
.
Slide the ignition switch forward (away
from the STOP position) (
Figure 2) .
Set choke lever into closed position if
starting from cold
(Figure 3).
Pull the starter cord until the engine starts
(or sounds like it wants to start) then
return choke to open position
.
After it starts, allow the engine to warm up
for at least 20 to 30 seconds.
For warm restarts, do not prime, just pull
the cord and it will start after one or more
pulls.
When ready to start trimming, depress
both throttle safety lock and throttle
control
(Figure 4)
.
While keeping the throttle safety lock
depressed pull on the throttle control for
full power
(Figure 5) .
To stop the engine, simply slide the
ignition switch back to the
STOP
position (Figure 6).
Figure 2.
Figure 3.
Figure 6.
Figure 4. Figure 5.
Figure 1.
Starting your
Hedgetrimmer.
ON
STOP