SANLI LazerCut LCS405, Инструкция по эксплуатации

Страница: 14 / 19

Sanli Product Service Schedule
To validate your 5 year warranty, you must
* Register your mower with Sanli Australia
* Maintain your mower and update this service log by Authorised Sanli Dealers
* Use fresh 95 Octane premium petrol ( Not older than 6 weeks )
* Change the Engine Oil every 25 hours or once a year using SAE30 (Details refer to page 11)
* Use and maintain your mower as per instruction manual
Product Code Serial No. Purchase Date
First service
(After 5 hours of usage)
Clean the machine to remove any grass build up and oil residue
Yes No
Change the Engine Oil (SAE30)
Yes No
Clean air filter (Details refer to page 11) Yes No
Check Spark Plug (Details refer to page 10)
Yes No
Notes
Second service
(25 hours usage after initial service or one year after purchase)
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Clean the machine to remove any grass build up and oil residue
Flush the fuel tank to remove any stale fuel and contamination
Check engine running speed and tune
Carburettor
Replace starter cord and re-wind the return spring and lubricate all moving parts
Run and test all machine functions (safety inspection)
Lubricate height adjuster mechanism, all control levers and cables
Check driving belt and cables and make any necessary adjustment
Change the Engine Oil (SAE30)
Check the air gap on the ignition coil and fit a new spark plug
Check air filter element and replace it (if required)
Sharpen and balance blade. Replace worn or damaged blade
Check fuel line and clean carburettor
Notes
Service carried out by:
(Sanli Dealer's Stamp)
Invoice No/Job No: Service Date: / /
PAGE 14