SANLI BSB 60, Руководство пользователя

Страница: 13 / 28

11
Fuel tank run until dry and then refueled
Fit the spark plug and reconnect the spark plug boot.
Move the stop switch to ON
Turn the choke knob to even if the engine is cold.
Now start the engine.
Pull the starter rope several times to prime the fuel line.
Set the stop switch to OFF
Open the throttle fully.
Pull the starter rope several times to clear the combustion chamber.
Operating lnstructions
During break-in period
During operation
After finishing work
A factory new machine should not be run at high
revs (full throttle off load) for the first three tank
fillings. This avoids unnecessary high loads during
the bresk-in period. As all moving parts have to bed
in during the bresk-in period, the frictional resistanc-
es in the engine are greater during this period. The
engine develops its maximum power after about 5
to 15 tank fillings.
After a long period of full-throttle operation, allow engine to run for a while at idle speed so that the heat
in the engine can be dissipated by flow of cooling air. This protects engine- mounted components (ignition,
carburetor) from thermal overload.
Storing for short period:
Wait for engine to cool down. To avoid condensation, fill the fuel tank and keep the unit in a dry place until
you need it again. Storing for a long period: see chapter"Storing the Machine".
Cleaning the Air Filter