16
SANKEN ELECTRIC CO., LTD.
December
201
6
PAN40004-001E
-02
Parallel Operation
DC modules capable of parallel operation are available as the
C130X24
C130X36
model. Be sure to pay attention to
following notes when operating in parallel using the DC
modules.
1. When using the DC modules with adjusted output voltage, all
DC modules to be connected in parallel must be adjusted inde-
pendently. When adjusting using the output adjuster, ensure there
are no bus bars bridging between different DC modules before
rotating the output adjuster. Upon completion of adjustment of
the output voltage, then please install the bus bars.
2. When connecting the output terminals, be sure to connect only
terminals with the same electrical polarity characteristics to the
same bus bar.
3. When installing DC modules in parallel operation configu-
ration in a base power unit, be sure to use only slots that are
designed for parallel operation in the base power unit, as per the
following table:
Slots corresponding to parallel operation
C300
C450
C650
Slot 1
○
○
○
Slot 2
○
○
○
Slot 3
○
○
○
Slot 4
○
○
○
Slot 5
○
×
○
: Compatible with parallel operation
×: Not compatible with parallel operation
4. When using the products with a dynamic load, be sure to apply
full evaluation and testing in the application before using.
CAUTION: The products are not compatible
with series operation. Be sure not to use the
products in a series configuration.
Functional Description
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
