To reset the
unit back to
normal
operation, in
delay mode.
14) RESETTING
HI-JACK IN
DELAY MODE
*
Enter your 4 digit code to reset
hi-jack, if entered correctly the
unit will sound a loud beep and
exit hi-jack mode. If entered
incorrectly, the unit will sound
rapid beeps.
11) HI-JACK
OPERATION
Hi-jack delay
mode.
The Hi-Jack countdown period is
1 min 45s. Once in Hi-Jack delay
period the counter will continue
to count down irrespective of the
state of the ignition. Refer to
point 14 to reset hi-jack.
12) HI-JACK
WARNING
PERIOD
Hi-jack
warning
mode.
After the countdown period the
unit will enter the 50 second
warning period. The keypad will
beep and flash the led and the
vehicle will begin to stall
intermitently*. At any point in
time you can reset hi-jack, refer
to point 15.
*
13) FINAL
HI-JACK
To confirm
what phase
the unit is in.
In final hi-jack the keypad will
beep and the led will be on solid.
The immobilizer will be armed. At
any point in time you can reset
hi-jack, refer to point 15.
9) FORCED
HI-JACK
MODE
Forced hi-jack
in drive.
*
When you start the vehicle, the
unit will enter hi-jack, the keypad
led will give a 1 second flash.
Refer to point 14 to reset hi-jack.
10) DRIVER’S
DOOR
HI-JACK
To activate
door hi-jack.
In drive ie ignition “on” open then
close driver’s door, the keypad
led will give a 1 second flash and
the unit will enter hi-jack delay
period. The keypad backlighting
will switch on.
*
driver’s door
opened
driver’s door
closed
1
2
3
4
5
led flashing rapidly
1
2
3
4
5
led on solid
HI-JACK OPERATION
Ignition
turned on
To reset the
unit back to
normal
operation, in
warning or
final mode.
15) RESETTING
HI-JACK IN
WARNING
OR FINAL
*
Press any button on the keypad
to stop the unit from beeping
(silent mode). You then have 6
seconds to enter your 4 digit
code to reset hi-jack. If no code
is entered the unit will start to
beep again. If entered incorrectly,
the unit will sound rapid beeps.
1
2
3
4
5
ENTER 4 DIGIT CODE
THE UNIT WILL COME DEFAULT FROM THE FACTORY WITH THE
HI-JACK FEATURES DEACTIVATED.
AVAILABLE ON THE ZX40-KP :
1. DRIVER’S DOOR HI-JACK ONLY: - DRIVERS DOOR HI-JACK WILL
ACTIVATE WHEN THE DRIVERS DOOR IS OPENED AND THEN CLOSED
WITH IGNITION ON.
2. DRIVER’S DOOR AND FORCED HI-JACK: - FORCED HI-JACK WILL
AUTO ACTIVATE EVERY TIME THE IGNITION SWITCH IS TURNED ON.
THERE ARE 2 HI-JACK FEATURES
8) HI-JACK FEATURES
THERE ARE 2 HI-JACK FEATURES AVAILABLE ON THE ZX40-KP :
1. DRIVER’S DOOR HI-JACK ONLY
DRIVERS DOOR HI-JACK WILL ACTIVATE WHEN THE DRIVERS DOOR
IN OPENED AND THEN CLOSED WITH IGNITION ON.
2. DRIVER’S DOOR AND FORCED HI-JACK.
1
2
3
4
5
ENTER 4 DIGIT CODE
Vehicle engine stall feature
will depend on vehicle make
and model and fitment
options
TO ACTIVATE DRIVER’S DOOR HI-JACK
THEN, PRESS AND HOLD BUTTON 1 & 5 UNTIL THE KEYPAD
SOUNDS ONE LOUD BEEP IE OPTIONS MODE. NOW PRESS
AND HOLD BUTTON 3 UNTIL YOU GET 2 BEEPS.
RESET THE IMMOBILIZER WITH YOUR 4 DIGIT CODE.
1
2
3
4
5
led flashing
slowly
1
2
3
4
5
IMMOBILIZER ARMED
ENTER EXISTING 4 DIGIT CODE
IMMOBILIZER RESET
led off
DRIVER’S DOOR
HI-JACK FEATURE
ACTIVATED
1 BEEP
1
2
3
4
5
PRESS & HOLD BUTTON 1&5
1
2
3
4
5
PRESS & HOLD BUTTON 3
2 BEEPS
TO ACTIVATE DRIVER’S DOOR AND FORCED HI-JACK
THEN, PRESS AND HOLD BUTTON 1 & 5 UNTIL THE KEYPAD
SOUNDS ONE LOUD BEEP IE OPTIONS MODE. NOW PRESS
AND HOLD BUTTON 3 UNTIL YOU GET 3 BEEPS.
RESET THE IMMOBILIZER WITH YOUR 4 DIGIT CODE.
1
2
3
4
5
led flashing
slowly
1
2
3
4
5
IMMOBILIZER ARMED
ENTER EXISTING 4 DIGIT CODE
IMMOBILIZER RESET
led off
DRIVER’S DOOR
AND
FORCED HI-JACK
FEATURES ACTIVATED
1 BEEP
1
2
3
4
5
PRESS & HOLD BUTTON 1&5
1
2
3
4
5
PRESS & HOLD BUTTON 3
3 BEEPS
THEN, PRESS AND HOLD BUTTON 1 & 5 UNTIL THE KEYPAD
SOUNDS ONE LOUD BEEP IE OPTIONS MODE. NOW PRESS
AND HOLD BUTTON 3 UNTIL YOU GET 1 BEEP.
RESET THE IMMOBILIZER WITH YOUR 4 DIGIT CODE.
1
2
3
4
5
led flashing
slowly
1
2
3
4
5
IMMOBILIZER ARMED
ENTER EXISTING 4 DIGIT CODE
IMMOBILIZER RESET
led off
TO DEACTIVATE ALL HI-JACK FEATURES
NO HI-JACK
FEATURES
ACTIVATED
1 BEEP
1
2
3
4
5
PRESS & HOLD BUTTON 1&5
1
2
3
4
5
PRESS & HOLD BUTTON 3
1 BEEP
16) LEARN MASTER CODE
RESET THE IMMOBILIZER WITH YOUR 4 DIGIT CODE.
1
2
3
4
5
led flashing
slowly
1
2
3
4
5
IMMOBILIZER ARMED
ENTER EXISTING 4 DIGIT CODE
IMMOBILIZER RESET
RESET THE UNIT AND HOLD BUTTONS 1 & 5 TOGETHER FOR +/- 2
SECONDS TO ENTER “OPTIONS MODE”, YOU WILL GET 1 CONFIRMATION
BEEP AND THE LED WILL FLASH RAPIDLY
THEN, PRESS AND HOLD
BUTTON 1 UNTIL THE KEYPAD SOUNDS A LOUD BEEP. NOW ADD THE
6 DIGIT MASTER CODE, IT MUST BE ENTERED IN TWICE AS
CONFIRMATION. IF NO MASTER CODE IS INPUTTED WITHIN 2 MINUTES,
THE UNIT WILL AUTO EXIT (NO NEW CODE SAVED).
led off
IN ARMED MODE, HOLD BUTTONS 3 & 5 TOGETHER UNTIL YOU HEAR A
RAPID BEEP, THE UNIT IS NOW IN MASTER CODE MODE. YOU HAVE 45
SECONDS TO ENTER THE 6 DIGIT MASTER CODE TO RESET THE UNIT.
IF NO CODE IS ENTERED THE UNIT WILL REVERT BACK TO NORMAL
ARMED MODE (WAITING FOR NORMAL 4 DIGIT RESET CODE). THE UNIT
WILL SOUND A RAPID BEEP TO WARN THE USER THAT THE UNIT IS
OUT OF MASTER CODE MODE. NOTE: THE UNIT WILL ONLY ENTER
MASTER CODE MODE IF A 6 DIGIT CODE HAS BEEN LEARNT IN TO THE
UNIT. THIS IS A ONCE OFF MASTER RESET FACILITY. THE NEXT TIME
THE UNIT NEEDS TO BE RESET IT WILL BE WITH THE NORMAL 4 DIGIT
CODE.
18) USING THE MASTER CODE IN FINAL HI JACK
IN HI-JACK FINAL MODE, PRESS ANY BUTTON TO STOP THE UNIT
FROM BEEPING, THEN PRESS AND HOLD BUTTON 3 & 5 TOGETHER
UNTIL YOU HEAR A RAPID BEEP, THE UNIT IS NOW IN MASTER CODE
MODE. YOU CAN NOW ENTER THE 6 DIGIT MASTER CODE TO RESET
THE UNIT FROM HI-JACK. WHEN THE UNIT STARTS TO BEEP AGAIN
THE UNIT WILL EXIT MASTER CODE RESET MODE AND WILL REVERT
BACK TO WAIT FOR THE NORMAL 4 DIGIT RESET CODE.
Rapid beeps
1
2
3
4
5
PRESS & HOLD BUTTON 3&5
ENTER SIX DIGIT CODE
17) USING THE MASTER CODE IN ARMED MODE
Rapid beeps
1
2
3
4
5
PRESS & HOLD BUTTON 3&5
ENTER SIX DIGIT CODE
1
2
3
4
5
PRESS ANY KEY TO STOP BEEPING
