1-800-800-8975
7
E
N
OPERATIONS
Before you clean
WARNING
Never put descaling, alcoholic, or detergent
products into the steam cleaner, as this may
damage it or make it unsafe for use.
!
WARNING
Tinted plates on foot may get hot while steam
mop is in use. Do not touch while hot.
!
Thoroughly sweep or vacuum
floor prior to cleaning with the
steam mop.
Cleaning hard floors
Your steam mop is designed to clean
hard flooring such as ceramic tile,
laminate, marble, stone and sealed
hard wood floors. Use of your steam
mop on waxed or some unwaxed
floors may result in a diminished
glossiness. The steam mop is not for
use on unsealed wood floors. For
best results test in an inconspicuous
area and check the care instructions
from your flooring manufacturer.
1. Plug the steam mop in and wait 30
seconds for it to heat up. Choose
the level of steam to clean your
floor: Low (delicate floors), Medium
(regular cleaning), High (durable
floors or sticky messes). Begin
cleaning by slowly passing the
steam mop over the floor surface.
2. For best results to sanitize an area
of your floor, use the microfiber
cloth pads and slowly and evenly
stroke your steam mop back and
forth at least three times over the
area using continuous steam.
3. Remove the pad after use
and wash.
4. To thoroughly clean dried-on sticky
spots, press and lock the Easy
Scrubber brush into place and
slowly move the brush over the
sticky spot to remove.
5. To turn off the steam mop, continue
to press the Steam Level button
until the blue light is illuminated
above the Steam Level button.
6. When the steam mop stops
emitting steam, unplug the unit.
Simply remove the water tank,
refill, and continue steaming.
MAINTENANCE & CARE
When you’re done
1. Unplug power cord from outlet.
2. Carefully remove the mop pad
using the tab from the mop head.
The mop pad and lower assembly
may be hot.
3. Any water remaining in the water
tank should be emptied prior to
machine storage.
4. Mop pad can be machine washed
in warm water. Use only liquid
detergents. Do not use fabric
softeners or bleach. For best
results, air dry.
5. Wrap power cord around quick
release cord wrap on back of
steam mop.
6. Wipe all surfaces of steam mop
with a soft cloth. Store upright in a
protected, dry area.
WARNING
To help reduce floor damage, never leave
machine unattended or stationary while steam is
turned on. A continuous cleaning motion is
recommended.
!
1624638_SteamMop.qxp_Mop English 6/23/20 12:48 PM Page 7
