Handle Lock
1. Store
Underneath
Underneath
4
HOW TO USE
HOW TO USE
The upright vacuum cleaner
The upright vacuum cleaner
is designed to be used on
is designed to be used on
multiple types of carpeting.
multiple types of carpeting.
Do not attempt to use the
Do not attempt to use the
upright vacuum cleaner on
upright vacuum cleaner on
bare fl oors,
bare fl oors, as damage to
the fl oor covering may result.
the fl oor covering may result.
Above the fl oor cleaning tools
Above the fl oor cleaning tools
are available (optional).
are available (optional).
Cleaner Height Setting
WARNING: Avoid injury. Keep loose clothing, hair,
fi ngers, and all other parts of body away
from any moving part (such as the revolving
brush). Turn off the switch and unplug the
cleaner before changing the cleaner height
setting.
The front of the cleaner has an ad just ment that raises or
lowers the cleaner base to match the type of carpet. With
the cleaner cord unplugged, set the ad just ment to low est
setting for maximum cleaning. If the clean er is diffi cult to
push, move ad just ment to next highest setting until cleaner
is com fort able to push. The brush roll must reach the carpet
for ef fec tive cleaning.
Make each adjustment with cleaner switch off and
cord disconnected from out let.
For ease in moving the
ad just ment knob, place handle in op er at ing position and tilt
cleaner back to re move weight from front wheels.
Handle Adjustment
Handle Adjustment
With the tip of the foot, press down to release the handle lock
With the tip of the foot, press down to release the handle lock
With the tip of the foot, press down to release the handle lock
located at the left rear side of the cleaner. Move the handle
and adjust it to the desired position for (1) storing upright, (2)
operating the cleaner at a comfortable height for the user,
and (3) cleaning underneath low furniture.
ON/OFF
Power Switch
The power switch is
mounted on the motor hood.
A push with the foot turns
the motor ON; push again
to turn the motor OFF.
Cord Storage
The cleaner has two convenient cord storage
hooks attached to the handle. However, some
models feature a quick release cord hook on
the upper handle. A downward twist of the
cord hook frees the cord for quick removal.
With either style, wind the cord around the
hooks for storage. Fasten the plug to the cord
to prevent unwinding.
HOW TO MAINTAIN
The instructions given in this booklet serve as a guide to
routine maintenance. To avoid unnecessary service calls,
check the bag, belt and brush roll often.
Disposable Dust Bags
Paper bags play a very important role in the effi ciency of a
vacuum cleaner. The purpose of a paper bag is to trap dirt.
But at the same time the paper bag must be porous enough to
allow air to pass through. If the paper bag becomes clogged,
no air can pass through the cleaner and no cleaning can take
place, regardless of how powerful the unit. Change the dust
bag frequently. Some fi ne particles can restrict airfl ow very
quickly and will decrease performance even before the bag
appears to be full. For that reason, when vacuuming carpet
fresheners or cleaners, powder, plaster dust, or similar fi ne
substances, the bag may need to be changed more often.
How To Change Disposable Dust Bag–Style F
& G, PN 54924A
CAUTION: Turn off the switch and unplug the electrical
cord before changing dust bag. Never
operate the vacuum cleaner without the
dust bag.
Ask for GENUINE EUREKA dust bags – Style F & G.
Look for the
symbol.
Look for the
symbol.
GENUINE
Look for the
symbol.
Look for the
symbol.
6. Roll up coil spring.
7. Place paper bag into outer bag.
NOTE: Be certain there are no folds
at the top or bottom of the
paper bag.
8. Lift zipper
4. Unfold
new bag.
3. Pull bag
throat off
sleeve.
1. Pull
zipper
down
5. Place bag
throat on
sleeve.
THROAT
THROAT
2. Roll down
coil spring.
