Sanipex BAGNODESIGN KOY BDB-KOY-879-MB, Руководство по установке

Страница: 4 / 8

PACKAGE CONTENTS
1x freestanding bath
1x Flex waste
connector Kit
1x Click -Clack
Carefully read through all instructions
• Each bath will come packed in a protective packaging bag (combi bag).
• Ensure to use the supplied straps to lift and move your product. Failure to do
so may result in damage to your product, if not properly handled.
• Your product must be installed by a competent, qualified plumber.
•
Carefully remove the bath from the box and the bag taking care not to drag or
scratch any part of the bath’s exposed surfaces.
Do not remove the protective packaging on the edge/rim of the bath until the
installation is complete.
• Flexible waste connector kit. NB. The male and female
ends must be siliconed onto the flexible hose by the
plumber once the correct length has been established
on site. This component is always supplied together
with the bath
•
Insert the waste “Click-Clack” through the aperture and
seal in place using a silicon sealant. Be careful not to over
tighten back nut.
Do not seal with window putty!