Sanipex BAGNODESIGN BDM-VIT-431-CP, Руководство по установке, Страница: 7 / 8

1. Purpose: Flush the impurities and silt in the pipe in case of the blocking.
2. Open the protective plastic sheet and protective cover Turn on the tap and
open up the supply valve rod to flush the pipe. Close the spool and test the
pressure resistance and tightness to make sure there no leakage.
3. Blocked all outlet of pipes with plastic plugs(1/2) and turn on the tap. Check
whether the connection port of the upper of the outlet pipe are tight and
the status of pipeline pressure. Make sure there is no leakage.
4. After the test of tightness, revers the protective plastic sheet and protective
cover.
Test of Water and Tightness
All surfaces should be cleaned using a clean damp cloth. No
abrasive cleaning agebts or materials should be used.
Cleaning