Sanipex BagnoDesign BDD-SPA-GEN4.5-1-A, Руководство по установке, Страница: 8 / 20

Electrical requirements:
Electricity supply circuitry:
1. Test the voltage of electricity supply and make sure steam engine with suitable electric
voltage should be used..
2. Insulated copper wire should be used with an anti-heat temperature of 90℃ and a specified
voltage of 500V. Refer to national or local electricity consumption code for the
specifications. Refer to the ammeter for the ampere.
3. Choose steam engine with suitable item number, and plug the ground wire into the ground
terminal.
4. Install an independent circuit breaker between the power supply and the steam engine so as to
provide an electricity supply with overflow protection and electricity leakage protection.
! All the connection must be in accordance with national and local electricity
consumption code and be installed by professional electricians.
Attention:
Installation of the top light
Light is available in 12V/220V/230V outputs. Before connect to the light, please consult with
manufacturer to know what voltage the light is, so as to avoid generator damage or cause
danger.
If the light output is 12V, the power of the light should not be more than 35W,othwise,
transformer will be burned and cause danger. If light input is 220v~240V,light power
should not more than 100W.
The light should be installed on the top of the steam room or the places where are not
access to the children.
OO NN IT
!
IU A T CUAC
The illustration is just for explaination, the practical installation must comply
with the nation's electric criterion,and processed by the professional
!
The steam control panel
(Possible location)
The steam
generator
Light
The steam outlet
The steam place under
the wash parr (Possible
location)
!
CAUTION:
CAUTION:
Take some moisture proof measures in process of installation.
Can not let the electrical components be exposed to moisture or, it will cause
damage or short circuit.
CAUTIO N:
GEN4.5-1