Sanipex BAGNODESIGN BAGNOSPA BDD-SPA-GEN6-3-A, Руководство по установке, Страница: 6 / 20

!
Important:
1. Please consult your distributors of building materials like acryl, fiber glass or other anti-heat
sheet about the installation position of steam nozzle.
2. In the entire steam room, it is required that steam can not leak out. The pipes, its accessories
and the holes in the wall should be air proof by applying air proof glue so that no steam will
enter the holes in the wall.
If non-heat-resistant material like acrylic
is used as building material, reserve a gap
no smaller than 1/4'' and fill with
heat-insulated material.
Airproof green material belt
Use airproof silicon gel or
o r r e s p o n d i n g a i r p r o o f
material to fill in the gaps in the
wall to achieve the water-proof
and damp-proof effect.
Inside wall in the steam room
Drainpipe (1/2'')
According to national or local rules, the steam engine drainage valve should be equipped with drainpipe.
The steam engine drains the water by using weight.
!
Attention: The drainpipe should not incline upwards so as to facilitate the drainage of water.
Safety valve
1. Safety valve is a piece of safe equipment in order to prevent too much steam pressure in the
interior steam engine due to various reasons.
2. The pressure limit range of safety valve is 15 PSI and the pressure will begin to decrease if
pressure should come over this value.
3. If it is allowed by local codes, provide the safety valve with exterior drainpipe.
!
Warning:
1. Do not dismantle the pressure decrease valve at random in case any danger should happen.
2. To maintain the proper and automatic operation of safety valve, make sure the safety valve
connection pipe is smooth.
GEN6-3