Sanipex BAGNO DESIGN BDM-BIS-451L Series, Руководство по установке

Страница: 4 / 8

2 3
Assemble the parts as per the above.
Ensure that the mains water supply is off
before installation. This mixer must be secured/
anchored to a suitable substrate to ensure the
mixer is stable. Be ore making any inlet pipe
connections, all supply pipes MUST be
Thoroughly flushed to remove debris. Failure to
do this could result in damage to the cartridge
and components or low flow from the mixer.
1
The concealed base needs to be installed
onto the stable substrate 55mm (min)
from finished floor level. The water supply pipes
will also need to be positioned under the
finished floor level.
Place the base into the
floor and mark the drilling
points. Make sure that the
line on the base is parallel
to the edge of the bath
tub, otherwise the pillar
will look crooked.
Drill the embedding floor and place the
supplied dowels for base fixing. Check
that the base is perfectly on line, helping with a
bubble level. Tighten the supplied screw to set
the base to the floor.