Sanipex AQUAECO AQA-ECO-703 Series, Руководство по установке

Страница: 6 / 8

1
Material 304 stainless steel Power DC9V(6AA Batteries
Volume 700ml Sensing Distance 5-9cm
Dimension 100 x 110 x 220mm Liquid Supply 0.5ml-2.5ml (5 step adjustment)
Net Weight 1.1kg Ambient temperature 0-45 °C
Liquid Adjustment
At the standby status, you can adjust liquid by pressing the liquid adjustment button. The default
liquid volume output is around 1.0ml before delivery, it will increase around 0.5ml output for per
press. Totally 5 levels adjustment with the range of liquid soap supply 0.5—2. Smt. Different liquid
may have a slight deviation.
Liquid Adjustment Button
Indicator
Troubleshooting
Problem Reason Potential Solution
LED indicator off Control system trouble Replace the controller
Power supply problem Check the Circuits and batteries
Batteries poor contract or out of power Re—install or replace e the batteries
Circuit problem or poor contact
Check the Circuits
Block sight of indicator Clean the indicator window
LED light flash Not enough power Replace the batteries
Indicator on Sensor continue working Remove the sensing object
without liquid Out of sensing distance Contact the the dealer
supply Unit fault Contact the the dealer
Insufficient liquid Short liquid supply time Adjust the liquid output
supply Too viscous liquid Reduce liquid viscosity
Liquid Coagulation or obstruction Try sometimes or contact the dealer
Tips: Please prevent debris from entering the container to avoid blocking.
Specification