step 1
1 – Shut off the water supply.
2 – Cut an adequate opening in the wall for the dimensions
of the box and the sleeve (not supplied).
3 – Insert the electronic flush valve’s box through the
4 – Connect the flush valve inlet to the water supply.
5 – Connect the flush valve outlet nipple to the pipe leading
to the W.C.’s inlet.
6 – Turn on the water supply. Make sure there is no water
leakage.
7 – Assemble the temporary protective cover to protect
the flush valve.
ENGLISH
FRANÇAIS
//
INSTALLATION
installing the flush valve and connecting the water supply
step 2
1 –
Once the electricity, plumbing and tiles works are
finished, replace the temporary protective cover with the
plastic seat. Adjust it using the four screws provided.
2 –
Connect the electronic unit connector that leads
to the solenoid valve to the solenoid connector.
2
–
Connect the electronic unit connector that leads to the
power source to the battery box connector.
connecting the power source
512077113
Concealed electronic flush valve with infrared powred
by battery
2
1
3
outlet
inlet
