Apply teflon tape to the
threaded end of both hose
adapters.
Screw adapters into
each end of Perform-
Max. Tighten turning
Attach the filter section of
flex hose to one hose
adapter and the return
section of flex hose to the
other hose adapter with
clamps and tighten with
screwdriver.
Above Ground, Base Installation – Model 910
TOE NIPPLE
CHECK
VALVE
BUSHING
HOSE
CLAMP
HOSE
ADAPTER
HOSE
CLAMP
HOSE
ADAPTER
TO POOL
1 1/2" OR 1 1/4"
FLEX HOSE
1 1/2" X 1 1/2" X 1 1/4"
HOSE ADAPTER
HOSE
CLAMP
FILTER &
PUMP
The Perform-Max should always be
installed between the filter and pool
(or between heater and pool if
applicable).
TO POOL
PUMP
FILTER
5
1.
2.
3.
4.
5.
1 to 2 revolutions with
wrench. DO NOT
OVERTIGHTEN.
MA
ERFORM-
POOLS
ANITIZER
MATERIALS NEEDED:
Two
Hose
Clamps
Check Valve
Rainbow #172288
RECOMMENDED:
OPTION:
1 1/2" Threaded by
1 1/2" Slip Bushing.
When installing with
hard PVC pipe, use
either a half union on
the outside port
threads or a bushing
on the inside port
threads.
#10 X 1 1/4" Phillips
Pan Head Screws with
Washers
Half
Union
or
TOOLS NEEDED
Installing a corrosion resistant check valve is recommended
for the protection of pool equipment especially a heater, from
chemical corrosion.
Teflon Tape
Two Hose Adapters
1 1/2" X 1 1/2" X 1 1/4"
Two Sections of
of 1 1/2" Flex Hose
(one provided with
filter)
For better stability, Perform-
Max may be mounted on a
base using Phillips pan head
screws.
Screwdriver
Wrench
