12
Rinsing/Cleaning/Draining
User Guide and Maintenance
Cleaning
Use a disinfecting wipe (not included in the package) to wipe down the
housing of the dispenser.
Caution: Please unplug the dispenser before cleaning.
All plastic parts are dishwasher safe. To prevent damage to the parts,
stainless steel sponges scrubbers should not be used to clean the
plastic parts.
Cleaning the plastic parts:
1. Before cleaning, make sure heating switch (#
⑥
)
is on the off (O) position.
Rinsing the water tank
2. Place a bucket beneath the water drain outlet(#
⑧),
remove the drain cap,
allow the water to drain from the dispenser . Water begins to flow once the
drain cap is removed.
3. Drain the liquid from the drain outlet then flush with water two or three
times by following the rinsing instructions above. Only disassemble parts
mentioned to avoid damaging the machine.
4. Once water is completely drained, reposition the drain cap. Ensure that all
pipes and wires are connected properly to keep normal use of the dispenser.
