Sangoma Netborder SS7, Руководство пользователя

Страница: 105 / 317

v1.14
105
9.2 Port Identification

In order to determine which physical T1/E1 port is: Port 1 Card 1

Select Identify button for Port 1 Card 1

The LED light will start flashing on a rear RJ45 T1/E1 port: rear panel.

Look at the rear panel of the appliance and plug in RJ45 cable to the blinking RJ45 T1/E1 port.

Once the Port 1 Card 1 is identified, the subsequent ports for that board are labeled.

Or alternatively keep using the Identify feature for each port.
NOTE

Identify picture of the device is always set to A108D
– 8 T1/E1 card. The LED will always bling
port 1. The image is not meant to reflect the real hardware image, nor real port location. User
should always view the rear panel for the flashing LED.

All Sangoma TDM T1/E1 cards Port 1 is closest to the PCI slot.