Sangoma B700 FlexBRI, Руководство по установке

Страница: 2 / 6

A) Ensure you are grounded.
(i.e., Touch unpainted metal to avoid destroying a computer
with electrostatic discharge, work on non-carpeted areas, etc.)
B) Carefully remove card and components from packaging.
Install your choice of supported software.
(e.g., Asterisk
®
, FreeSWITCH, Yate, CallWeaver, etc.)
See the list of compatible software at:
http://www.sangoma.com/products_and_solutions/compatible_software
Thank you for purchasing the Sangoma B700 FlexBRI card!
Please follow these instructions to begin using your new card.

2. INSTALL YOUR HARDWARE

1. INSTALL YOUR PBX SOFTWARE
Server
B700 FlexBRI Full product specifications available at SANGOMA.COM
BRI Module(s)
Y-cable(s)
Red = TE Mode Green = NT Mode
TE MODE NT MODE
Analog Module
or
FXO
FXO-2
FXS
TE MODE NT MODE
FXO-2
> B R I < > B R I < > F X O / F X S <
O
N
1
2
SW3
D2
D1
D3
D4
D5
D6
O
N
1
2
SW4
O
N
1
2
SW1
O
N
1
2
SW2
Termination
Resistors
TE = Off
NT = On
Power Feeder
for NT mode**
B700 BRI Card
Molex Power
Connector*
Full-height Bracket
Optional half-height
bracket included Optional Echo
Cancellation Module
Jumper Pins †