This facility allows you to change the display language for the menus.
1. Use the
Select
control to switch on your radio and to access the menus. If needed, use the
Back
option to
access the main Mode menu. Rotate the
Select
control until 'Configure' is highlighted on the display then
press the
Select
control to enter the Configure menu.
2. Rotate the
Select
control until 'Language' is highlighted then press the
Select
control to access the list of
available languages (English, French, Spanish, German, Danish, Italian, Dutch, Portuguese, Finnish, Swedish
and Norwegian).
3. Rotate the
Select
control to highlight the desired menu language. Press the
Select
control confirm your
choice and to restart the radio using the chosen language.
Software version display
The software version display is provided for your reference only.
1. Use the
Select
control to switch on your radio and to access the menus. If needed, use the
Back
option to
access the main Mode menu. Rotate the
Select
control until 'Configure' is highlighted on the display.
2. Press and release the
Select
control to enter the Configure menu. Rotate the
Select
control until 'Version' is
highlighted.
3. Press and release the
Select
control to show the current software version on the display. Rotating the control
will display additional information. Use the
Back
option to exit.
Network configuration
This menu enables you to configure your radio’s network settings, scan for a connection to an alternative
wireless network, or to manually configure the network parameters. This can be useful if you take the Internet
radio to another location where there is a different network setup.
It is possible to configure your radio to connect to your network via an available Ethernet connection (RJ-45)
or via a Wi-Fi router.
Configuring the radio only to use a wired Ethernet connection
1. From the radio’s Network Configuration menu, select 'Wired / Wireless'. This menu will present you with
three options: 'Wireless Only', 'Wired Only'and'Auto'. Selecting 'Wired Only' will allow cause the radio to
restart and then to use only its Ethernet connection to communicate with the network. The radio will also
disable its wireless network capabilities. This will require your radio to be physically connected to a wired
Ethernet using the RJ-45 socket on the rear panel.
Configuring the radio only to use a Wi-Fi connection
2. Selecting the 'Wireless Only' option from the 'Wired / Wireless' menu will allow cause the radio to restart
and then only to use only its Wi-Fi connectiontocommunicatewiththenetwork.Theradiowillalsodisable its
