12
Settings in menu
●
The charger may not supply power to some USB devices.
●
When not using or after charging, remove the USB cable.
● Do not connect power source to USB port. Otherwise there is a risk of fire. The USB port is only
intended for charging lower voltage devices.
●
Do not insert a nail, wire, etc. into the USB power supply port. Otherwise a circuit short may
cause smoke or fire.
●
Do not connect this USB socket with your PC USB port, as it is highly possible that it may cause
breakdown of both units.
●
Never use the USB socket in rainy or moist conditions to prevent moisture from entering the radio.
IMPORTANT
SNOOZE 5
When the alarm sounds, pressing any button other than the Power button will silence the alarm for
5 minutes. To adjust the silence time for the snooze timer, when the display appears and flashes
“SNOOZE X” in the settings menu, press the Select button to enter the setting. Rotate the Tuning
control knob to adjust the silence time from 5, 10, 15 and 20 minutes for the snooze timer. To cancel
the snooze timer while the alarm is suspended, press the Power button.
12 / 24H (12 hour or 24 hour clock format)
When the display appears and flashes “12 / 24H”, press the Select button to enter the setting. Rotate
the Tuning control knob to select “12H” or “24H”. Press the Select button to confirm12 hour or 24 hour
clock format.
If the 12 hour clock format is chosen, the clock radio will then use the 12 hour clock for the setting of
alarms, and will display a 12 hour clock with an AM or PM indicator on the display.
FACTORY (System reset)
When the display appears and flashes “FACTORY”, press the Select button to enter the setting. Rotate
the Tuning control knob to select “RESET YES” or “RESET NO”. Select “RESET YES” and press the
Select button to reset the radio. It will erase all saved settings and preset memory stations. All settings
will revert to factory default settings.
USB OUT (Charging with USB socket)
Содержание RCR-29
Страница 1: ...Version 1 RCR 29 GB ...
