10
3. Press the TUNING up/down button to choose the Time zone setting for your area, then press the
SELECT button to confirm the setting. The options for European countries are –2H, -1H, 0, +1H,
+2H, +3H The options for the US are EST, CST, MST, PST, ALAS, HAW.
Note:
When switching on the radio after a power disconnection, you will need to complete the time zone
setting before the normal operation of the radio.
Software version
The software display cannot be altered and is just for your reference.
1. Press Menu button to enter the menu setting.
2. Press the TUNING up/down button until “VER XX” appears on the display to view the software
version of your radio.
Loudness
You can get compensation on lower and higher frequency for your radio by adjusting the Loudness
function.
1. Press the Menu button to enter the menu setting.
2. Press the Tuning control until ‘LOUD ON or OFF’ appears on the display. Press the Select button
to enter the setting.
3. Press the Tuning up/down button to choose ON to turn on the loudness function, then press the
Select button to confirm the setting.
4. To turn off the loudness function, select OFF and press the Select button to confirm the setting.
Display backlight
The brightness of the display can be adjusted when the radio is in Standby mode and when it is in
use. Press the Backlight button and the display will illuminate. To turn off the backlight, press the
Backlight button again.
At the same time, you can adjust the display backlight level by rotate the backlight control at
the bottom of your radio.
Factory reset
If your radio fails to operate correctly, or some digits on the display are missing/incomplete or you
simply just want to restore to original factory setting, carry out the following procedure.
1. Press the Menu button to enter the menu setting.
2. Press the Tuning up/down button until “FACTORY” shown on the display. Press the Select button
to enter the setting.
