background image

6

GB

   Battery operation using rechargeable batteries 

. Remove the battery cover on the back of the unit by sliding the
    cover in the direction of the arrow.
2. Insert 6 x rechargeable AA ( UM3 ) batteries into the spaces in
    the compartment. Take care to ensure all batteries are inserted
    with the correct polarity as shown inside the battery compartment. 
    The radio is designed to be used with Nickel Metal Hydrive 
    (NiMH) rechargeable batteries.
3. Slide the battery switch to the Rechargeable position and then
    replace the battery cover.
4. Insert the supplied AC power adaptor into the DC IN socket on
    the left hand side of the radio and plug the adaptor into a standard 
    3A mains socket outlet.
5. The charge light will flash indicating batteries are charging. 
    Batteries will be fully charged in around 7 hours while charge
    LED will stop flashing.
Important: 
when  using  rechargeable  batteries,  the  battery  switch  must  be 
placed in the Rechargeable position. Batteries will only be charged 
when the radio is switched off and connected to the AC adaptor.

6. Reduced power, distortion and a “ stuttering “ sound are all signs
    that the batteries may need recharging. Charge LED will be
    lighted when batteries have no power to turn on the radio.
7. If the radio is not to be used for any extended period of time, it is 
    suggested that the batteries are removed from the radio.

Содержание PR-D7


















Отзывы: