background image

2

   Listening to weather channels

The weather alert function on the radio can alert you to special 
weather related emergencies. During an emergency or weather-
related hazard, NOAA issues an emergency tone that will set off an 
audible and/or visual alarm on the radio.

Note:

 

Hazard warnings are not available in all areas.

There are 7 standard NOAA weather channels used in the US 
and Canada. The radio receives broadcasts up to 40 miles from 
transmitting stations.

. To listen to the standard NOAA weather channels, turn on the 
    radio and extend the telescopic antenna to get better reception. 
    Then press the WX alert button and WX is shown on the display.

2. The channel number of the weather station is shown on the display. 
    Press the Tuning up/down button to select the programmed 
    channels. There should be one or more weather service stations 
    broadcasting in your local area. You will hear a report that is 
    updated usually once or more per day for your area. If there is a 
    severe weather or weather-related emergency, NOAA will update 
    weather broadcast more frequently. If there is a weather Emergency, 
    NOAA will issue an alert tone.

Содержание PR-D4W























Отзывы: