Time set
For the first time to operate this radio ,display will show "--:--"
after you installed the batteries . Press TIME SET button display will
show TIME SET and clock flashes'0:00' or 'AM 12:00'. Press HOUR
adjustment button and MINUTE adjustment button to set the time
Press TIME SET button again to finalize the time setting ,The clock will
start from 0 second.
If CLOCK AUTO ADJUST switch set to ON position ,while turn on the
radio and receiving FM stations with RDS CT (clock time) function ,the
clock will be adjusted by RDS CT signal automatically.
Note :While receiving RDS signal, display will show RDS symbol ,however
it is not always the RDS station broadcasting CT signal
Before the time is set ,it is not possible to set the alarm (standby)
time.
Alarm time (Standby) set
Press STANDBY button ,alarm mode will appear BUZZER ,LAST CH ,and time
will flash ,First select the alarm mode by pressing STANDBY button
again to have alarm by buzzer STANDBY or alarm by radio
(last radio fuequency will appear )or alarm off
During time flash ,using HOUR and MINUTE to set the alarm time,then press
Standby button again.Display Buzzer or LAST CH.or setted frequency will
disappear within 4 seconds and only appear STANDBY- (Alarm by buzzer)or
-STANDBY(alarm by radio).
When alarm on,press Power/Sleep button or STANDBY button to switch off,
and back to its Standby status.
Alarm will last for one hour before it is switched off.If radio is on and
alarm on,the radio will sound BI BI and display alarm by radio symbol
will flash.
Snooze
When alarm on,press any operational key except STANDBY, POWER and LOCK
it will be into SNOOZE status, display will appear and the alarm
will sound again after about 5 minutes. This cycle will be repeated for
1 hour unless to switch off the alarm
.
14
13
18
1
11
11
4
Z
Z
Z
Содержание PR-D1
Страница 1: ......
