Sangean FMT-02, Руководство пользователя

Страница: 16 / 20

15
GB
F
E
NL
D
1.
When there is an incoming call, press the Call button on the Gotune to answer your phone call.
2.
Speak in direction of the built-in microphone. Note that a very high volume setting may decrease
sound quality.
3.
Press the Call button to end the phone call.
Auxiliary input socket
A 3.5mm stereo Auxiliary Input socket is provided on the rear of your GoTune to permit an audio
signal to be fed into the unit from an external audio device such as iPod, MP3 or CD player.
1.
Press the Power On / Off button to switch on your GoTune.
2.
Choose the way that you have connected GoTune to your vehicle's audio system as previously
described.
3.
Press the Mode button to select Auxiliary Input mode.
4.
Connect an external audio source (for example, iPod, MP3 or CD player) to the Auxiliary Input
socket.
5.
Adjust the volume setting on your iPod, MP3 or CD player to ensure an adequate signal level
from the player, and then use the volume control on the vehicle's audio system as needed for
comfortable listening.
When in Auxiliary Input mode, if the input signal is too large, the output sound of vehicles audio
system may be unstable. It is recommended to turn down the volume of your external audio device.
NOTE
Sleep timer
Your radio can be set to turn off after a preset time has elapsed. The sleep timer setting can be
adjusted between 15 and 180 minutes.
1.
Press the Power On / Off button to switch on your GoTune.
2.
Press and hold the Info / Menu button to access the menu for the current mode.
3.
Rotate the Tuning control knob to select “System” and press the Tuning control knob to enter the
system settings menu.
4.
Rotate the Tuning control knob to select “Sleep” and press the Tuning control knob to enter the
setting.
5.
Rotate the Tuning control knob to select the desired sleep time (15,30,60,90,120,180). Select the
“Sleep Off” to cancel the sleep function.
6.
Press the Tuning control knob to confirm the setting. An active sleep timer is shown using a
symbol “S” on the playing display. Your radio will switch into power off mode after the preset time
has elapsed.
7.
To view the remaining time of an active sleep timer setting, go back to steps 2-4.The remaining
time will show on the display.