Sangean DPR-67, Руководство пользователя

Страница: 20 / 26

9
Software version
The software display cannot be altered and is just for your reference.
Ensure your radio is switched on and in DAB mode.
. To view the software version on the display press and hold the Info button for seconds.
2. Repeatedly press the Tuning Up/Down button until the display shows “SW version“ on the
lower line. Press the Select button to enter the SW version. The version number is then
shown on the lower line of the display. Press and release the Info button to normal tuning
mode.
System reset
If your radio fails to operate correctly, or some digits on the display are missing or incom -
plete carry out the following procedure.
. Press and hold down the Info button for seconds
2. Repeatedly press the Tuning Up/Down buttons until the display shows “Factory reset”,
then press the Select button.
3. If you wish to perform the reset operation, press the Select button one more time. A full
reset of your radio will be performed. All presets and station lists will be erased.
4. After a system reset a scan of the DAB band will be performed. In case of malfunction
due to electrostatic discharge, reset the product (reconnection of power source may be
required) to resume normal operation.