4
GB
Setting the date format
. With your digital receiver switched on, press and hold down the Menu button to access the
menu setting.
. Rotate the Tuning control until “DATE FMT” shows on the display. Press and release the
Tuning control to enter the date format setting.
3. Rotate the Tuning control to select the required date format. Press and release the Tuning
control to confirm your choice of date format. The display will then revert to the previous menu.
Setting the alarm clock
Your DPR-45 digital receiver has two alarms which can each be set to wake you to AM, DAB, FM
radio or buzzer alarm.
The alarms may be set while the unit is in standby mode or while playing. The alarm clock setting
will not function when the display appears NO CLOCK.
. Before setting an alarm ensure that the clock time is set. Press and hold the Menu button.
. Rotate the Tuning control to select the required alarm, or . Press and release the Tuning
control to enter the alarm setting.
3. Rotate the Tuning control to choose whether to set the alarm to On or Off. If you decide to
abort alarm setting, choose Back and press the Tuning control.
4. Press and release the Tuning control. If the previous selection was to switch on the alarm,
then alarm time setting will show on the display and the Alarm hour digits will flash. If Off was
selected, the unit will exit the alarm menu.
