Sangean DMS-16, Руководство пользователя

Страница: 13 / 34

12
Operating your system – DAB
1. Fully extend the telescopic aerial.
2. Press the Standby button to switch on your system then
press DAB. Display will show “Welcome to Digital Radio“ for a
few seconds.
3. If this is the first time the radio is used, a quick scan of
DAB channels will be carried out. The display will show
“scanning“. If the system has been used before, the last
used station will be selected.
4. During the scanning, as each group of stations is detected,
the bottom line of the display will show the stations count.
The top line of the display shows a bar graph indicating
progress of the Scanning.
5. When the Scanning is completed, the first station will be selected.
6. If the station list is still empty after Scanning, your system will
display “Station not available“.
7. If no signals are found, it may be necessary to relocate
your system to the position giving better reception.
GB
20060919_DMS-16_381P501-A_GB.p65
2006/9/19, ¤W¤È 09:15 15