Sangean DDR-7, Руководство пользователя

Страница: 29 / 33

028
Factory reset
If you wish to completely reset your radio to its initial state this may be
performed by following this procedure. By performing a factory reset, all
user entered settings will be erased.
With your radio switched on, press and hold the Menu button to
access the menu for the current mode.
Rotate the Tuning control knob to select “System Setup”. Press the
Select button to enter the system settings menu.
Rotate the Tuning control knob to select “Factory Reset”. Press the
Select button to enter the setting.
Rotate the Tuning control knob to select “Yes” or “No”. If you do not
wish to carry out a system reset, select “No” and then press the Select
button to confirm the setting. Or choosing “Back” will go back to the
previous menu display. Press the Select button to confirm your choice.
With “Yes” selected, press the Select button to reset the radio. It will
erase all saved settings and preset memory stations. All settings will
revert to factory default settings.
1.
2.
3.
4.
5.