9
Finding new stations - DAB
As time passes new stations may become available. To find new stations
proceed as follows:-
1. Press and release the
AutoTune button
, the display will show
"Autotune Quick Scan". Your radio will perform a scan of the channel
10A~12D frequencies. As new stations are found the station counter
on the right-hand side of the display will increase and stations will be
added to the list
2. To carry out a full scan of the entire DAB Band III frequencies press
and hold down the
AutoTune button
for more than 2 seconds and
then release. The display will show "Autotune Full scan". As new
stations are found the station counter on the right-hand side of the
display will increase and stations will be added to the list
Autoselect - DAB
As an alternative to pressing the tuning control to select a station your
radio can be set so as to automatically select a station.
1. Rotate the
Tuning control
a few clicks in either direction, immedi-
ately press and hold in the tuning control until the display shows
"Autoselect ON".
2. Rotate the
Tuning control
until the station you require is visible on
the display, after a few seconds your radio will automatically select
the station shown on the display.
3. To switch off Autoselect rotate the
Tuning control
a few clicks in
either direction, immediately press and hold in the
Tuning control
until the display shows "Autoselect OFF".
DDR-3_381K801A_GB.p65
2004/2/27, 下午 02:09
10
