2
6.2
Press Boost button once: 1/2 HOUR LED light illuminates.The
loads turn on, and will turn off automatically 1/2HOUR later;
6.3
Press Boost button twice: 1HOUR LED light illuminates. The
loads turn on, and will turn off automatically 1HOUR later;
Health & Safety
Regulations.
proceeding.
may be subject to change without prior notice.
Health & Safety
This unit must be installed by a suitably qualified person in accordance with the latest IEE Wiring
Regulations.
Isolate mains supply before commencing installation. Please read all installation instructions before
proceeding.
Example circuit diagrams for typical installations are shown. These diagrams are schematic and should
be used as a guide only. Please ensure that all installations comply with the current IEE regulations. For
reasons of space and clarity not every system has been included and the diagrams have been simplified,
for instance some Earth connections have been omitted. Other control components shown in the
diagrams i.e. Valves, Room Stats etc. are general representations only. However, the wiring detail can
be applied to the corresponding models of most manufacturers.
Your product is not user serviceable. Do not dismantle this product.
Due to our policy of continuous product improvement and development, the specifications in this guide
may be subject to change without prior notice.
Elite Security Products
Unit 7, Target Park, Shawbank Road,
Lakeside, Redditch, B98 8YN
Tel: 01527 515150
Fax: 01527 515143
Email: [email protected]
Web: www.espuk.com
6.1
The Powersaver Boost offers 3 options for the on period duration
using the BOOST button as fig. 7.
Operation Guide:
6
The Powersaver Boost offers 3 options for the on period duration
using the BOOST button or the hidden BOOST button behind front
plate.
Press once = ½ hour
Press twice = 1 hour
Press three times = 2 hour
Press four times = Cancel function
Duration can be extended or cancelled by successive presses.
Fig.7
3 user-selectable
boost periods
BOOST
LED
Fig.8
Fig.9
6.4
Press Boost button three times: 2HOUR LED light illuminates.
The loads turn on, and will turn off automatically 2HOUR later;
6.5
Press Boost button four times: the Boost function is canceled, the
loads and all the LED lights will turn off.
Fig.10
Fig.11
6.7 Extend Boost:
Whilst Boost timer is active, pressing the “BOOST”button will extend
the Boost time and the corresponding indicator light will turn on.
For example, if“1HOUR”selected, when the load is on, press
“BOOST”button again, the Boost time will be extended to
2HOUR, and the 2HOUR LED light will illuminate.
Press
“BOOST”button
again, boost is canceled and the load will turn off.
2 Hours selected
After 1 Hour
After further 1/2 Hour
After 2 Hours total
Fig.12
6.6
While the Boost timer is active the indicator light will change to
show the maximum remaining time; e.g. 2 Hours selected.
Date Issued
J20
A30-PSPB-01-2
Rev.1
Issue No
Description