-
11 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
parameters keep the same.
The function of geo-fence does not have relation with Arming or Disarming.
Example:
I want to activate the fence, if the center’s latitude is 23.1400,
longitude is 113.4500, if the fence is a circle with Radius of 500meters,
then
the
SMS
instruction
is:
111111FEN1(XL:
23.1400
,YL:
113.4500
,X:
500
,Y:
500
)
4.5 Movement alert
Command:
111111MOVx
X is 0, to deactivate the movement alert
X is 1, to activate the movement alert, using the latitude & longitude of
present location.
111111MOV
？
To check the center’s position
。
Once the system is arm, the movement alert will automatically be activated.
Once the system is disarmed, the movement alert will automatically
deactivated.
In arming condition, you could send 111111MOV1 to activate it & test the
function
4.6 Speed alert
Command:
111111SPD:X
,
x is in KM/H , maximum value is 320KM/H
(For example: 111111SPD:60, if the speed is over 60KM/H, it will send SMS to
warn you)
Command:
111111SPD:?
,
to check the setting of the over speed
Note:
1) Use a new GSM SIM card, as all info in this card would be
automatically cleared in this alarming system.
-
12 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
2) Use a GSM SIM card with service of Incoming Telephone Number
Display.
5. INSTALLATION And Wire Diagram
The GPS antenna chooses the position and is fixed
5.1 The GPS antenna installs when should guarantee the receive face on (sky),
also place above does not have the metal to cover, shield
5.2 The GPS antenna suggested installs the position
Underneath first windshield hideaway
First gauge board (epidermis for nonmetallic material quality) underneath
hideaway
Underneath the latter windshield plays the part of under the board
The first bumper (epidermis is nonmetallic material quality)
Attention:
If the windshield will glue has the thermal insulation layer to reduce
the GPS receive signal, will create GPS to work abnormally, this time
please will replace the GPS antenna to install the position.
5.3 The GPS antenna may adsorb on the metal object, or glues reliably with
the width sponge force two-sided rubber, please note the GPS antenna not to
be possible to tear down the outer covering.
5.4 The GPS wire hideaway and pulls to the main engine nearby, antenna plug
insertion main engine corresponding plug.
The GSM antenna chooses the position and is fixed
1
）
The GSM antenna suggested installs the position
Underneath first gauge board hiding place
Underneath the latter windshield plays the part of under the board
Underneath chair hideaway
2). sweeps the GSM wire hideaway pulls to the main engine nearby, antenna
plug insertion main engine corresponding plug.
Attention:
The GSM antenna may not to the GPS antenna juxtaposition, also
the wire is sure not mutually to twine, avoids disturbing, is far away the sound
box as far as possible Central lock System..
