The remote control works with one CR2025 battery. The protective strip must be removed before
use.
ON/OFF button :
-
Press the ON/OFF button (A) once to activate the fan. The appliance will start to run at the
lowest speed (indicator lights 3 and 4 will light up on the LED display).
-
To turn off the fan, press the ON/OFF button again.
Oscillation button :
-
Press the Oscillation button (B) when the appliance is switched on so that the fan oscillates
from left to right. The Oscillation indicator light (1) on the control panel lights up. To
deactivate the oscillation function, press the Oscillation button (B) again. The oscillation
indicator light (1) goes out on the control panel.
Speed button :
-
Press the Speed button (C) while the fan is running to select the desired air speed: low,
medium or high. The selected speed is indicated on the LED display (P1, P2 or P3).
Mode button (Operating mode) :
-
When the device is operating, you can select the desired wind mode by pressing the Mode
button (D): normal mode (indicator light number 4 lights up on the display), natural mode
(indicator light number 5 lights up on the display) or sleep mode (indicator light number 6
lights up on the display).
Timer button :
-
When the fan is running, you can set the timer to stop automatically after a specified time.
Press the timer button (E) repeatedly to select the desired period in one-hour increments from
1 hour to 9 hours. The LED display shows the set time (1H, 2H, 3H, 4H, 5H, 6H, 7H, 8H, 9H).
-
A few seconds after selecting the time, the display shows the room temperature again.
-
When the timer function is activated, the corresponding indicator light (2) on the control panel
lights up.
-
To deactivate the timer, press this button until the indicator light (2) on the control panel goes
out.
