S&T TSB48-FR, Руководство пользователя

Страница: 8 / 13

7
1.5 Deletion of transmitter ID
1. When finish programming temperature and pressure unit, press P to
access the transmitter deletion interface. Only the programmed and
received transmitter will be shown and only the last 3 ID digits will
be shown:
2. Press any of the four arrow keys to locate the tire position to be
deleted.
3. Press S key for 3 seconds to delete with the screen flashes twice and
beep buzzes twice to confirm the deletion. Then it automatically
switches to next transmitter location.
Note: After programming, press P key for 3 seconds to return to normal
mode.
IV. Installation of TPMS ST@HDR Transmitter
Before install the transmitter, make sure the transmitter has been
programmed into the receiver and receiver is under normal mode. If no
transmitter is programmed or transmitter signal is not received after
program, the screen will display “NSP”.