KISS 2U Short V3 - User Guide, Rev. 1.1
// 20
4.1.1.
USB Ports
The two USB 2.0 ports are located on the front side of the product (Figure 9, pos.11 and Figure 10, pos. 2), behind the
front access panel.
Figure 10: Power button and USB 2.0 ports
1.
Power button
2.
USB (2.0) ports
If USB devices are connected to the USB ports on the front side, the front access panel door
cannot be closed and locked.
4.1.2.
Controls and Indicators
4.1.2.1.
Power Button
The power button (Figure 9, pos. 7 and Figure 10, pos. 1) is located on the front side of the product, behind the front
access panel. Press the power button to switch on or switch off the product.
Pressing the power button for longer than four seconds initiates a forced system shutdown before the power to the
product is switched off.
The power button does not disconnect from the mains power supply. When switched off
using the power button, there is still a standby voltage of 5 VSB on the mainboard.
AC Power cable and power connectors must always remain easily accessible.
The KISS 2U Short V3 is only completely disconnected from the mains power supply when
the power cable is disconnected, from the mains power socket or the KISS 2U short V3’s AC
input power connector (Figure 13, Figure 14, pos. 1).
If the end environment restricts access to the power cable, disconnection must be
guaranteed using a separate cut-off fixture.
Performing a forced shutdown can lead to loss of data or other undesirable effects!
1
2