KBox A-203-sXAL4 – User Guide Preliminary Rev. 0.2
// 33
6.1.
System Mounting
In order to adapt the KBox A-203-sXAL4 for mounting Kontron offers different mounting solution such as:
KBox A-203-sXAL4 configuration with vertical mounting plate for installation into a control cabinet or to a wall
KBox A-203-sXAL4 for DIN Rail mounting into a control cabinet
KBox A-203-sXAL4 configuration with horizontal mounting brackets for installation into a control cabinet or to
a wall
KBox A-203-sXAL4 for desktop operation without mounting (with rubber feet)
Depending on the ordered KBox A-203-sXAL4 configuration, your system is supplied with the corresponding
mounting plate, mounting brackets and/or DIN Rail clip.
The key holes of the vertical mounting plate (Figure 12, pos. 2) allow you to mount the KBox A-203-sXAL4 inside the
control cabinet in vertical position.
The key holes of the mounting brackets (Figure 12, pos. 2) allow you to mount the KBox A-203-sXAL4 to a wall or
table in vertical as well as in horizontal position.
Prepare the mounting surface with four screws and if necessary anchors corresponding to the mounting surface type
(fire-resistant material). Please refer to the information for mounting in the section 9.1.2, “Mechanical Specifications
of the KBox A-203-sXAL4 with Vertical Mounting Plate”, 9.1.3 “Mechanical Specifications of the KBox A-203-sXAL4
with Wallmount Bracket”, 9.1.1 “Mechanical Specifications of the KBox A-203-sXAL4 as Desktop” or refer to the
drawings for KBox A-203-sXAL4 on our web site. The drawings can be downloaded from our web site
www.kontron.com by selecting the product name. Register for the EMD Customer Section to get access.
For a sufficient air circulation around the device, we recommend not to mount or operate
any other devices within the “Restricted Area” around the KBox A-203-sXAL4; refer to the
red marked area in Figure 18, Figure 19.
Figure 18: Restricted area for mounting around KBox A-203-sXAL4 (desktop side view with antenna)
GESPERRTER BEREICH
(Anschlüsse)
99.5
130
KEEP OUT AREA
(for cable connections)