S&T kontron FlatView Series, Руководство пользователя

Страница: 63 / 65

FlatView – User Guide, Rev. 2.0
www.kontron.com // 63
12/ Warranty
Kontron defines product warranty in accordance with regional warranty definitions. Claims are at Kontron’s discretion
and limited to the defect being of a material nature. To find out more about the warranty conditions and the defined
warranty period for your region, following the steps below:
1. Visit Kontron’s Term and Conditions webpage.
http://www.kontron.com/terms-and-conditions
2. Click on your region’s General Terms and Conditions of Sale.
Limitation/Exemption from Warranty Obligation 12.1.
In general, Kontron shall not be required to honor the warranty, even during the warranty period, and shall be exempted
from the statutory accident liability obligations in the event of damage caused to the product due to failure to observe
the following:
 General Safety Instructions for Equipment within this user guide
 Warning labels on the product and warning symbols within this user guide
 Information and hints within this user guide
Additionally, alterations or modifications to the product that are not explicitly approved by Kontron, described in this
user guide, or received from Kontron Support as a special handling instruction will void your warranty.
Due to their limited service life, parts that by their nature are subject to a particularly high degree of wear (wearing
parts) are excluded from the warranty beyond that provided by law. For example, this applies to a CMOS battery.
There is a protection label on your FlatView.
If the product is opened, the warranty is lost.