COMe-cTL6 – User Guide Rev. 1.7
// 26
In general, memory modules have a much lower longevity than embedded motherboards, and therefore the EOL of
the memory modules may occur several times during the lifetime of the module. Kontron guarantees to maintain
memory modules by replacing EOL memory module with another qualified similar module.
As a minimum, it is recommended to use Kontron memory modules for prototype system(s) in order to prove the
stability of the system and as a reference. In order to qualify the RAM it is recommend to configure three systems
running a RAM Stress Test program in a heat chamber at 60°C, for a minimum of 24 hours.
For a list of Kontron memory modules, see Table 7.
2.3.7.
Graphics
2.3.7.1.
Display Resolution
The following table lists the maximum display resolutions at a set frequency and bit per pixel (bpp) for the supported
display interfaces.
Table 11: Display Resolution
Display Interfaces
Maximum Resolution
(Pixel)
eDP
4096x2304@60 Hz
DP
7680x4320@60 Hz
HDMI 1.4
4096x2304@60 Hz
4K Support
Yes, at 60 Hz
8K Support
Yes, at 60 Hz
2.3.7.2.
Graphics Interfaces
The processor graphics is based on Generation 12 graphics core Architecture. Gen 12 architecture supports up to 96
Execution Units (EUs) depending on the processor SKU.
Table 12: Display Interfaces
TGL Port
COMe Port
DDIA
LVDS
eDP (option)
TCP0
DDI1 (DP++)
TCP1
DDI2 (DP++)
TCP2
DDI3 (DP++)
TCP3
DP2VGA Converter (optional)
Table 13: DDI1 Interfaces
COMe Connector
PCH
Description
DDI1_PAIR[0:3]
TCP0_TX[0:3]
DDI1_PAIR[4:6]
-
DDI1_CTRL
TCP0_AUX_P (CPU)
DDP1_CTRLCLK
DDI1_CTRLDATA_AUX-
TCP0_AUX_N (CPU)
DDP1_CTRLDATA
