S&T Kontron COMe-cTL6, Руководство пользователя

Страница: 62 / 106

COMe-cTL6 – User Guide Rev. 1.7
www.kontron.com // 62
Pin Signal Description Type Termination Comment
B25 S SATA 3 Receive Pair + nc --- ---
B26 SATA3_RX- SATA 3 Receive Pair - nc --- ---
B27 WDT Watch Dog Time-Out event O-3.3 PD 10K ---
B28 HDA_SDIN2 Not Connected nc --- not supported
B29 HDA_SDIN1 Audio Codec Serial Data in 1 I-3.3 PD 20k in
PCH ---
B30 HDA_SDIN0 Audio Codec Serial Data in 0 I-3.3 PD 20k in
PCH ---
B31 GND Power Ground PWR GND --- ---
B32 SPKR Speaker O-3.3 PD 20k +/-
30% in PCH PD is enabled
until reset is
deasserted
B33 I2C_CK I2C Clock O-3.3 PU 2k21 3.3V
(S5) ---
B34 I2C_DAT I2C Data I/O-3.3
PU 2k21 3.3V
(S5)
---
B35 THRM# Over Temperature Input I-3.3
PU 10k 3.3V
(S0) no function
implemented
B36 USB7- USB 2.0 Data Pair Port 7 – DP-I/O PD 14.25k to
24.8k in PCH ---
B37 USB7+ USB 2.0 Data Pair Port 7 + DP-I/O PD 14.25k to
24.8k in PCH ---
B38 USB_4_5_OC# USB Overcurrent Indicator Port 4/5 I-3.3 PU 10k 3.3V
(S5) ---
B39 USB5- USB 2.0 Data Pair Port 5 – DP-I/O PD 14.25k to
24.8k in PCH ---
B40 USB5+ USB 2.0 Data Pair Port 5 + DP-I/O PD 14.25k to
24.8k in PCH ---
B41 GND Power Ground PWR GND --- ---
B42 USB3- USB 2.0 Data Pair Port 3 – DP-I/O PD 14.25k to
24.8k in PCH ---
B43 USB3+ USB 2.0 Data Pair Port 3 + DP-I/O PD 14.25k to
24.8k in PCH ---
B44 USB_0_1_OC# USB Overcurrent Indicator Port 0/1 I-3.3 PU 10k 3.3V
(S5) ---
B45 USB1- USB 2.0 Data Pair Port 1 – DP-I/O
PD 14.25k to
24.8k in PCH
---
B46 USB1+ USB 2.0 Data Pair Port 1 + DP-I/O PD 14.25k to
24.8k in PCH ---
B47 ESPI_EN# [Enable/Disable] ESPI- Mode/LPC-
Mode I-3.3 PU 10k 1.8V
(S5) ---
B48 USB_HOST_PRSN
T USB Host Detection I-3.3 --- ---
B49 SYS_RESET# Reset Button Input I-3.3 PU 3k32 3.3V
(S5) ---
B50 CB_RESET# Carrier Board Reset O-3.3 PD 10k ---
B51 GND Power Ground PWR GND --- ---