IntelliTrac P1 Personal Tracker User Guide
Systems & Technology Corp. © 2008
This document contains confidential, restricted, and proprietary information. The document has been prepared for the
exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in
part, without the prior, written consent of an authorized officer of S&T.
- 18 -
2.5
Firmware Upgrade
The IntelliTrac P1 firmware is updated through the serial interface. The firmware update of the device can be
performed with the IntelliTrac A series firmware loader tool provided by S&T. It runs on Windows based PCs.
Please see the following step-by-step upgrade procedure.
(1) Connect the RS232 cable between device an PC.
(2) Turn on the device.
(3) Run AseriesLoader.exe, the following window is displayed.
(4) Click [
…] button to open firmware file which provide by S&T
(5) Click Write button and start firmware programming.
(6) When the writing progress 100% is reached, the device LEDs will start to fast blinking.
(7) Wait until device LEDs stop fast blinking.
(8) Firmware update complete.
