GB
15
Operation
Switching On Your Wine Cooler
Connect the mains cable to the mains socket. Set the operating temperature. Press / to
adjust the temperature.
Changing between Fahrenheit and Celsius
Press
to change the temperature unit.
Switching On or Off the Interior Light
Press
to switch on or off the interior light.
When you use the wine cooler for the first time or restart the wine cooler after having
been shut off for a long time, there could be a few degrees variance between the
temperature you select and the one indicated on the display. This is normal and is due
to the length of the activation time. Once the wine cooler is running for a few hours
everything will be back to normal.
If you are concerned that the temperature display of wine cooler is not correct and wish to
check the temperature you will need a special fridge/freezer thermometer. You may also
need a hygrometer to check the humidity of your wine cooler. These are available from most
supermarkets and hardware shops.
Place the thermometer and hygrometer on the middle shelf of the wine cooler, where it can be
read easily. Leave overnight, compare the temperature of the thermometer and the display in the
wine cooler. The humidity in the wine cooler should be between 50%-80% RH depending on the
type of wine.
Stacking the Wine Bottles
The shelf system has been designed so that a range of shelf heights can be selected. All the
shelves can be adjusted.
When placing the bottles into the wine coolers, make sure there is no contact with the back inner
surface.
Max Capacity : 8 bottles
SWC8B1T16E_IB_5L_RC_161103_grace.indb 15
3/11/16 4:15 pm
