39
GB
Starting a Wash Cycle
1. Ensure the unit is connected to the mains power and the water supply is fully opened (water
pressure between 0.04MPa and 1.00MPa).
2. Open the door. Pull out the lower and upper baskets, load the dishes and push the baskets
back. It is recommended that the lower basket is loaded first, and then the upper basket.
3. Pour in the detergent or place the detergent tablet in the detergent compartment and close
firmly afterwards.
4. Press the
On/Off
button.
5. Close the dishwasher door,A click sound should be heard when the door is closed correctly.
Do not slam the door.
6. Select the wash cycle programme based on the loading and soil requirements. Please refer
to the section Wash Cycle Table.
7. Then press the start/pause button, the indicator light of the selected programme will
illuminate.
8. The washing cycle will begin shortly.
t
If you open the dishwasher’s door during the washing cycle and then close it, the dishwasher will continue
the current washing programme after 10 seconds. However, if the door is not closed correctly after 1
minute, the dishwasher will beep at 1 minute intervals.
t
The programme light will blink while the wash cycle is running.
SDW60W15N_IB_5L_Final150521.indb 39
21/5/15 12:28 pm