7
Mains Power
This unit is designed only to operate with
the supplied AC adapter.
Connecting the radio to any other power
source may damage it.
• Unwind the AC adapter cable to its full
length.
• Connect the plug at the end of the
cable to the DC IN Socket on the back
of the radio.
• Plug the AC adapter into a mains socket
and switch the socket on (if necessary).
The unit is now connected and ready to use.
• To switch the unit off completely,
unplug the mains adapter from the
mains socket.
Standby Control
When you fi rst connect the radio to the
mains socket, the radio will be ON.
• Press (Standby) to switch the unit to
standby mode.
• Press (Standby) again to switch the
unit on.
Disconnect the AC adapter from the mains
socket if you want to switch the unit off
completely.
Getting Started
Fitting Batteries
You can fi t batteries (not supplied) to your
radio for portable operation.
• Press the battery cover catches
(arrowed).
• Lift off the battery cover.
• Fit 6 x AA batteries (not included) into
the battery compartment, observing
polarity as shown.
• Re-fi t the battery cover.
Dispose of used batteries with regard to
the recycling regulations in your area. Do
NOT short circuit batteries or throw them
into water, the general rubbish or in a fi re.
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
When battery powered, the
button
will function as a POWER ON/OFF button.
When switched off , the radio and display
will power off completely to conserve
battery power.
SDABXRL13_IB.indd 7
08/04/2013 10:30
