GB
8
Operations
Paring the bluetooth receiver with a bluetooth Device:
1.
Plug the power cable of the adapter into the mains power socket on the side of
your bluetooth receiver.
2.
Plug the mains adapter into a wall socket and switch the power on.
3.
The LED on the top of your bluetooth receiver will flash.
4.
Activate your bluetooth device to the searching mode.
5.
“SBTREC11” will appear on your bluetooth device.
6.
Select “SBTREC11” and enter “0000” for the password if necessary.
7.
The LED will stop flashing and keep on to acknowledge successful pairing.
For poor signal, your bluetooth receiver may disconnect from the bluetooth device, but it will
enter pairing mode automatically. If your bluetooth receiver fails to connect with the bluetooth
device after 20 seconds, LED starts flashing. If your bluetooth receiver still fail to connect the
bluetooth device after 10 seconds flashing, you need to activate your bluetooth device to enter
the searching mode.
SBTREC11E_IB_Final120628.indd 8
28/06/2012 10:38 AM
