19
GB
Battery Replacement for the Remote Control
The remote control requires a CR2025, 3V Lithium battery.
1. Slide and hold the battery release tab in the
direction of the arrow.
2. Pull out the battery compartment and remove the
old battery.
3. Replace with a new battery.
4. Insert the battery compartment back into the
remote control.
Handling the Battery
•
Improper or incorrect use of batteries may cause corrosion or battery leakage, which
could cause fire, personal injury or damage to property.
•
Install the battery correctly by following the polarity (+ and –) indications in the
battery compartment.
•
When the battery is exhausted, the remote control will not function.
•
Only use the battery type indicated in this manual.
Removing the Plastic Strips from the Remote Control
Remove the plastic strips from the batteries if
the batteries are being used for the first time. It
is located at the bottom rear side of the remote
controls.
Содержание S92PDT12E
Страница 2: ......
Страница 219: ......
Страница 220: ...DSG Retail Ltd co no 504877 Maylands Avenue Hemel Hempstead Herts HP2 7TG UK IB S92PDT12E 131017V3...