Sandstrom S66IDAB10, Инструкция по эксплуатации, Страница: 17 / 28

GB-15
Pr
oduc
t O
ver
view
and
G
etting
Star
ted
Basic
Oper
ation
D
AB
Oper
ation
FM
Oper
ation
iP
od
Oper
ation
/
AUX
Oper
ation
M
ain
tenanc
e,
H
in
ts
and
Tips
and
Specifica
tion
Saf
et
y
W
ar
nings
FM Operation
Selecting FM Mode
Press the MODE button on the unit or the remote control repeatedly until the display
shows “ Switch to FM ”.
On the top line of the display is the current frequency. On the bottom of the display,
<Programme Type> will show since no channel is tuned in and no RDS (radio data system)
data is available.
Auto Scan
To search for an FM station, you need to press and then release the SCAN button. This will
start scanning up the frequency band. To scan down the frequency band, press and hold
the
SCAN
button. Once a station has been found, the scanning will stop automatically.
If no station is found, then the tuning will stop once it has cycled through the entire FM
band (87.5-108MHz).
Manual Scan
To search FM stations manually, simply press the buttons repeatedly until your
desired frequency is reached.
Storing Stations
You can store up to 10 of your favourite stations to the preset stations. This will enable you
to access your favourite stations quickly and easily.
1. To store a preset, you must first be listening to the station that you would like to save,
then press and hold the PRESETS button.
2. Press the buttons to select your desired preset station number.
3. Press the
ENTER
button to confirm the selection.
4. The station will be stored and the LCD will then show “
Preset # stored
“.
Recalling a Stored Station
1. Once you have saved a station to one of the preset buttons, you can recall it by
pressing the
PRESETS
button.
2. Press the buttons to select your desired preset station number.
3. Press the
ENTER
button to confirm the selection.
4. If you choose a preset that hasn’t been allocated a station, the display will show
“
Preset empty #
“.