GB
11
Power Source
Mains Power
• This unit is designed to operate with an AC power supply or with the
built-in battery.
• Connecting the unit to any other power source may cause damage to
the unit. Unwind the mains adapter to its full length. Connect the end of
the cable to the DC 12V
socket at the rear of the unit and then
connect the mains plug to the mains socket.
• Make sure the mains adapter is fully inserted into the mains socket. The
unit will start charging after it is connected with the mains power.
• Charge the internal battery for 8 hours before first time use. Do not
overcharge the unit. Disconnect the mains adapter plug from the mains
socket to stop charging.
• While the battery is charging, the CHARGE LED indicator flashes in red.
When the battery is charged to full capacity, the CHARGE LED indicator
lights up green. Remove the mains adapter. The unit is now ready to use.
• To switch the unit off completely, turn the function control to OFF
position, and withdraw the mains adapter from the mains socket.
AUX IN
EARPHONE
DC 12V
To the mains
socket
• The battery is partially charged at shipment. Charge the battery to full for the first
time use. It takes about 8 hours at fully charged.
• Make sure that the function control is turned to OFF position for battery charging.
• Do not disconnect the mains power adapter during charging.
• Ensure all necessary audio connections of the unit are connected before
connecting to the mains power socket.
S2RADRB_W12E_IB_140926_will.indb 11
26/9/14 3:55 PM
