
19
Clock Setting
When the microwave is connected to the mains power, the LED display will show ”0:00” and
the microwave will sound once. Please ensure that you have set the clock prior to use.
Please follow the steps below to set the clock.
1. Press the CLOCK button and the hour
digits will flash.
2. Press the
buttons to adjust the hour
digits. The input time has to be within 0-23.
3. Press the CLOCK button and the minute
digits will flash.
4. Press the
buttons to adjust the minute
digits. The input time has to be within
0-59mins.
5. Press the CLOCK button again to complete
the clock setting. “ : ” will start flashing. The
clock setting is complete.
• This is a 24-hour clock. When the microwave
is connected to the mains power for the first
time or when the power is resumed after a
power interruption, the LED display will show
“0:00”. To re-set the clock, follow the above
5 steps.
• In the process of clock setting, if the STOP/
CLEAR button is pressed or if there is no
operation within 1 minute, the microwave will
go back to the previous status automatically.
• To find out the current time while the
microwave is operating, press the Clock
button. It will last for 2-3 seconds and then
return to its original display.
1, 3, 5
2, 4
S23MGB_W13_IB_RC_140301_grace.indd 19
03/01/2014 2:49 PM